by Naveen kumar | Aug 9, 2024
Standard operating procedure for calibration of weighing balance Aim: To lay down the procedure for calibration of the weighing balance Scope: This SOP is applicable for calibration of weighing balances used in (area – your area or department) Responsibility:...
by Naveen kumar | May 23, 2024
1.0 OBJECTIVE The objective of this Standard Operating Procedure (SOP) is to establish a consistent and controlled process for the procurement, storage, handling, and disposal of biological indicators used for the qualification and monitoring of sterilization...
by Naveen kumar | May 21, 2024
Operating of Horizontal Double door Autoclave 1.0 OBJECTIVE The objective of this Standard Operating Procedure (SOP) is to provide detailed, step-by-step instructions for the proper operation of a double-door autoclave used for sterilization purposes. 2.0 SCOPE This...
by Naveen kumar | May 21, 2024
Standard Operating Procedure for Performing the Bowie-Dick Test on Steam Sterilizers 1.0 OBJECTIVE The objective of this Standard Operating Procedure (SOP) is to describe the method for evaluating the even and rapid steam penetration in a double-door...
by Naveen kumar | May 21, 2024
Operating procedure for Biosafety cabinet 1.0 OBJECTIVE The objective of this SOP is to provide instructions for the proper operation, monitoring, and maintenance of biosafety cabinets used in controlled microbiological environments. 2.0 SCOPE This procedure applies...
