by Naveen kumar | Sep 6, 2024
SOP For Operation of friability apparatus 1.0 OBJECTIVE To define the procedure for the operation and calibration of the friability test apparatus used in tablet testing. 2.0 SCOPE This Standard Operating Procedure (SOP) applies to the Production department. 3.0...
by Naveen kumar | Sep 3, 2024
Calculation Of Bulk Density and Its Importance in Pharma In this article let us learn about how bulk density is calculated and its importance in the pharmaceutical industry as well as how to perform practically. After Reading this article you will be able to: Perform...
by Naveen kumar | Sep 1, 2024
Understanding the Role of Tablet Bed Temperature in Tablet Coating Tablet bed temperature is a critical factor in the tablet coating process. It refers to the temperature of the tablets within the coating pan, where the entire load of tablets in the pan is...
by Naveen kumar | Aug 26, 2024
In-process check during Inspection of Tablets by IPQA Personnel Inspection of tablets is done after the compression or coating step in the pharmaceutical industry. This inspection process is a country-specific requirement based on the regulatory requirements of the...
by Naveen kumar | Aug 26, 2024
“Why Granulation is Preferred Over Direct Compression in Pharmaceutical Manufacturing” In the Pharmaceutical industry, granulation is the preferred method instead of direct compression of powders, this is because of the advantages associated with granules....
