by Naveen kumar | Sep 28, 2024
“Top 7 Granulation Interview Questions in Pharma and How to Answer Them” What factors influence particle size distribution in the granulation process? The particle size distribution during granulation can be controlled by adjusting several parameters,...
by Naveen kumar | Aug 27, 2024
The Role of Differential Pressure in Pharmaceutical Manufacturing Introduction Differential Pressure is one of the important critical parameters in any pharmaceutical manufacturing facility and this differential pressure need to be properly maintained by checking the...
by Naveen kumar | Aug 26, 2024
“Understanding and Overcoming Picking and Sticking in Tablet Compression” Tablet defects: Sticking and picking are the two most prevalent issues observed during tablet compression, most of you may not differentiate between them due to the similarity, as...
by Naveen kumar | Aug 25, 2024
Why the Stem of the Lower Punch is Longer Than the Upper Punch In this article, you are going to learn the key differences between an upper and lower punch in a tablet compression machine. The functionalities assigned to each punch of a tablet press are also...
by Naveen kumar | Jul 19, 2024
Like we see defects in tablet compression, tablet coating is also associated with some defects. In this article, we will see the defects that are possible for coated tablets during the manufacturing process and most of the defects are due to the low technical skills...
