by Dr. Yashashwini Reddy | Aug 29, 2025
1. Purpose To define the procedure for calibration of the Slit-to-Agar Air Sampler used for environmental monitoring to ensure accurate measurement of microbial air contamination. 2. Scope This SOP applies to all STA air samplers used in microbiology or cleanroom...
by Dr. Yashashwini Reddy | Aug 11, 2025
Calibration of Disintegration Test Apparatus in Pharmaceuticals 1. Introduction The Disintegration Test Apparatus is used to determine the time required for tablets or capsules to disintegrate into particles small enough to pass through a defined mesh under prescribed...
by Dr. Yashashwini Reddy | Aug 11, 2025
Calibration of Friability Test Apparatus 1. Introduction The friability test determines the ability of uncoated tablets to resist mechanical stress during handling, packaging, and transportation. The friability test apparatus (e.g., Roche Fryolator) rotates tablets in...
by Dr. Yashashwini Reddy | Aug 11, 2025
Calibration of Glassware – Class A vs Class B Class A Higher accuracy and tighter tolerance limits. Calibrated to meet ISO, USP, or ASTM standards. Used in critical pharmaceutical and analytical work where precision is crucial. Example tolerance for 100 mL volumetric...
by Dr. Yashashwini Reddy | Aug 11, 2025
Calibration of Hardness Tester in Pharmaceuticals 1. Introduction Tablet hardness testers are used in pharmaceutical QC labs to measure the crushing strength of tablets, which affects packaging, transport, and dissolution. Regular calibration ensures reliable and...
